Editor’s Choice
Editor’s Comment
The authors evaluated fused deposition modeling for the production of aneurysm models replicating patient-specific anatomy using 3D rotational angiographic data from 10 patients. A hollow model with connectors for silicone tubes was fabricated by using acrylonitrile butadiene styrene, the support material was then dissolved, and the surfaces finished by using NanoSeal. The models were filled with iodinated contrast and 3D rotational angiography was performed. Reproduction of hollow aneurysm models was technically feasible in 8 of 10 cases, and a high level of anatomic accuracy was observed.
Abstract
BACKGROUND AND PURPOSE
As part of a multicenter cooperation (Aneurysm-Like Synthetic bodies for Testing Endovascular devices in 3D Reality) with focus on implementation of additive manufacturing in neuroradiologic practice, we systematically assessed the technical feasibility and accuracy of several additive manufacturing techniques. We evaluated the method of fused deposition modeling for the production of aneurysm models replicating patient-specific anatomy.
MATERIALS AND METHODS
3D rotational angiographic data from 10 aneurysms were processed to obtain volumetric models suitable for fused deposition modeling. A hollow aneurysm model with connectors for silicone tubes was fabricated by using acrylonitrile butadiene styrene. Support material was dissolved, and surfaces were finished by using NanoSeal. The resulting models were filled with iodinated contrast media. 3D rotational angiography of the models was acquired, and aneurysm geometry was compared with the original patient data.
RESULTS
Reproduction of hollow aneurysm models was technically feasible in 8 of 10 cases, with aneurysm sizes ranging from 41 to 2928 mm3 (aneurysm diameter, 3–19 mm). A high level of anatomic accuracy was observed, with a mean Dice index of 93.6% ± 2.4%. Obstructions were encountered in vessel segments of <1 mm.
CONCLUSIONS
Fused deposition modeling is a promising technique, which allows rapid and precise replication of cerebral aneurysms. The porosity of the models can be overcome by surface finishing. Models produced with fused deposition modeling may serve as educational and research tools and could be used to individualize treatment planning.
Read this article: http://bit.ly/3DPrinting-IntracranialAneurysms